SUPPORT USER GUIDES All General question How to work Kodi Tips About playback About firmware Basic Settings APPS Tools User Manual VIDEO REVIEWS

How to flash Z1000 Pro


NOTE: Please remove all the external storage device(such as Sdcard、SATA、USB)on box before you flash it. Just keep the one USB your need for falshing.


There is some risk for flashing your Z1000 Pro BOX, please be quite careful to make it.(It will clean out user data entirely, if you are not professional, please be cautious to do it.)

The following Flashing Process is about Z1000 Pro, attaching Z1000 Pro TV BOX:

First, do some preparation:

① A Z1000 Pro TV BOX, one HDMI cable, A TV set (You kept surely, do not say any more);

② a quite fine needle, you can use other finer tools instead of it, such as toothpick, etc. ( In order to hold down the Reset button );

③U disk, ensuring that it is as below the format of FAT32


At the beginning, you need to download the ROM and rename to "install.img";

Download address:

With Google framework version: https://mega.nz/file/KUNR2SiY#LaVX2iUKOAWdC8vKDxia7Kp1sAdUomqadK4zJiR0o2U

Without Google framework versionhttps://mega.nz/file/bBcDkaqD#cfz5Zc-XPVXA0KW2-RqEvkeF02-3BV99YsHPBXFv0SU

then copied to the Root Directory of the Udisk, then, insert U disk into one of USB3.0 port, as shown below red line mark.



Flash your box now: First,press the RESTORE button then turn on the power by the same time,



while you have connect to TV, the TV will show the schedule,proved that you are flashing now,if you have connect to TV,

the TV will show the schedule,proved that you are flashing now,(If not shown or have a green screen, is a normal phenomenon, don't power off either,just wait for 10 minute until the vfd shows "hello"


this flash process about two minutes ) , after finishing flashing will showed you install completed,



then it will enter the system automatically(It will be a little longer for the first time, about 2 minutes),