NOTE: Please remove all the external storage device（such as Sdcard、SATA、USB）on box before you flash it. Just keep the one USB you need for flashing.

There is some risk for flashing your Z9X BOX, please be quite careful to do it.(It will clean out user data entirely, please follow the instructional tutorial or seek guidance from official professionals when flashing the device for the first time!)

The following Flashing Process is about Z9X, attaching Z9X TV BOX:

First, do some preparation:

① A Z9X TV BOX, one HDMI cable, A TV set (You kept surely, do not say any more);

② a quite fine needle, you can use other finer tools instead of it, such as toothpick, etc. ( In order to hold down the Reset button );

③U disk, ensuring that it is as below the format of FAT32

At the beginning, you need to download the ROM and rename to "install.img";

Download address：

With Google framework version： https://mega.nz/file/PFF1mDJR#2lpbTb40Zf-6if9xX5LRKN1h2crCbwtXnK5qPNvLByw

Without Google framework version：https://mega.nz/file/ORciRTTA#gmqHNJUZEa7-9BV5o5a3e0B4-5rhxXdPFPl8na-Gx9A

then copied to the Root Directory of the Udisk, then, insert U disk into one of USB3.0 port, as shown below red line mark.

Flash your box now: First,press the RESTORE button then turn on the power by the same time,

If you have connect to TV,the TV will show the schedule,proved that you are flashing now, release Restore now.

(If not shown or have a green screen, is a normal phenomenon, don't power off,just wait for 10 minute until the vfd shows "hello") 

the flashing process is about two minutes , after finishing flashing will show  Install completed,

then it will enter the system automatically(It will be a little longer for the first time, about 2 minutes),