SUPPORT USER GUIDES All General question How to work Kodi Tips About playback About firmware Basic Settings APPS Tools User Manual VIDEO REVIEWS

HOW TO FLASH ZIDOO X6 PRO BOX


1 – First of all, download image files and tools available via Dropbox:

  1. Zidoo X6 Flash Image (V1.0.33).
  2. Zidoo X6 Flashing Tool (v1.39)
  3. I did however found a better driver here:Generic Driver – The driver works better in Windows 10.
  4. Zidoo’s Own Kodi.apk (Bundled with V1.0.33).
  5. Zidoo X6 OTA archive (V1.0.33).
  6. Zidoo X6 Flash Image (V1.0.19). – Do not download unless you read “5 – Fresh Start“.

2 – How to Flash using the Image file:


  • To flash a Zidoo X6 Pro, you are going to need an OTA cable.  You can make your own by following this better instruction of these instructions or these instructions.

    • Download both the Image and Flashing files. (NOTE: Use the Generic Driver, as it works better in Windows 10)
    • Extract both files in (1) and (2) to a local directory. (I.E.: on your desktop create a directory zidoo and extract the files there)
    • Boot into Flashing Mode:
      • Make sure the Zidoo X6 is powered down, all cables are removed and you have your USB OTG Cable is plugged into your PC.
      • Use a pin and push it into the “RESET” hole AND HOLD IT THERE.
      • Using the “double sided usb male cable” connect to your USB/OTA of the Zidoo X6 Pro.

  • Start your “Factory Tools” program and choose your extracted image file:
    • You will also see one of the ports display “LOADING”.
    • Hit run and wait for the dump to complete.
    • Disconnect the OTA Cable and reconnect the power, HDMi and LAN (If used) cables.
    • Boot the system up.
    • Any questions, read more here

    3 – To Flash using USB OTA Image:

    • Download the OTA Flash file in (4).
    • Place the OTA Zip file on a USB Stick and plug it into your Zidoo X6.
    • On your Zidoo X6 click Settings/About/Update
    • Choose the second option, Local Update.
    • Brows to the USB OTA file and choose it
    • Let the system update…

    4 – To recover your Kodi (ZDMC):

    • Download the APK file in (3).
    • Uninstall and remove all references to Kodi from your Zidoo X6.
    • NOTE: Path of kodi is:
      /storage/emulated/0/Android/data/org.xbmc.kodi/files/.kodi/
    • Install the APK file.
    • NOTE: If you get asked, do the bit to allow Android installation from Unknown Sources…

    5 – Fresh Start:

    You can always have a complete Fresh Start by burning the the V1.0.19, downloaded from Point 1, and then use OTA Images from Zidoo X6 Downloads Here to step-by-step increase the release to the desired release you want.